Hans 4171NF Click Torque Wrench 1/2" Drive x 50-250 ft.lb. 25"

Hans 4171NF Click Torque Wrench 1/2″ Drive x 50-250 ft.lb. 25″

Drive: 1/2″ Drive
Torque Range: 50-250 ft.lbs
Length: 25″

FEATURES:

• The click-type torque wrench in a proper sense is a special type of torque wrench.
• It is used for setting and adjusting the correct torque in order to prevent using too much power when tightening a screw.
• Once the preset torque is reached, the wrench “nips off” to prevent using more power on tightening.
• A click torque wrench gives an audible sound when the correct torque setting has been reached.
• This type features a spring-loaded lever which is adjusted by twisting the handle to the right setting.
• When the required torque level is achieved, the lever breaks which creates a clicking noise.
• The click torque wrench is used for fastening and correct tightening of nuts, screws, bolts and anything else.
• That needs a specific amount of torque that is calibrated so as not to exceed a threshold.
• A tightening carried out with tools without torque control can cause damage to the thread